The Technical regulations of the Eurasian Economic Union (TR CU or TR EAEU for newer regulations) are different. And by saying “different” we mean that the procedure of getting the EAC certificate may vary to some extent depending on the...
Technical Regulation TR CU 032/2013, "On Safety of High Pressure Equipment", is one of the few regulations, compliance with which is monitored by the Federal Service for Environmental, Technological and Nuclear Supervision (Rostekhnadzor), therefore, all controversial issues that relate to said regulation are dealt with by this body. One of such issues is pipe certification.
Lots of our clients supply machinery to the Eurasian Economic Union (Russia Federation, Kazakhstan, Belarus, Armenia, and Kirgizstan). This product type is regulated by TR CU 010/2011 «On safety of machinery and equipment».
It’s honestly quite hard to imagine the modern industrial world without such a vital part as the motor. And we’re not talking about the vehicle motors now, although we know they’re extremely important as well. We’re talking about the motors that may be embedded in different stations, big machinery tools, industrial boxes, means of telemechanics and many other items.
EAC fire certificate for products is a permissive document confirming that the items in question comply with all quality standards and regulations effective in the field of fire safety assurance in the Customs Union countries.
Technical Regulation of the Customs Union "On safety of equipment operating under excessive pressure" (TR CU 032/2013) applies to a large number of products. This paper will discuss the topic of proving the conformity of vessels.
TR EAEU 043 is one of the most challenging regulations of the Eurasian Economic Union. In this article we will speak about features, hidden agendas and useful information of this regulation of the EAEU.
WorldWideBridge gets many questions about the marking of explosion-proof equipment, and we have prepared an article that details the marking requirements for this type of equipment according to GOST 31441.1-2011 “ Non-electrical equipment for potentially explosive atmospheres”.
The TECHNICAL REGULATION OF THE CUSTOMS UNION TR CU 010/2011 "On the safety of machinery and equipment" assumes several schemes for declaration and certification. One of them is the 5d declaration scheme, which is applicable to the equipment operating in particularly hazardous production sites.
Pumping equipment is one of the most common types of equipment used in all industries. Certification of pumps is a mandatory procedure, the purpose of which is to confirm the compliance of the product with the established safety standards.
Engines on! Tractors and getting an EAC certificate for them in accordance with the TR CU 031/2012 “On safety of agricultural and forestry tractors and their trailers”: highlights and main things manufacturers need to know about this approval document.
The technical passport is considered as one of the most essential documents for any equipment. Here’s why: it indicates the basic information about the equipment. It’s always presented by the manufacturer regardless of the country of the manufacturer. And it must be in the Russian language or bilingual (Russian/English).
It's not always easy to issue an EAC certificate for huge machines especially when it's impossible to carry out the site audit or delivering samples to the accredited laboratory in EAEU. Here's one simple but effective way to get around this problem. Limited batches only.
As was announced before the Technical Regulations of the Eurasian Economic Union “Requirements to the fire safety and firefighting means” (TR EAEU 043/2017) come into force from the 1st of January 2020. So, let’s go through main points of this regulation.TR EAEU 043/2017 partly replaces the Russian Law #123 «About fire safety requirements». Some products should be approved according to new regulation. The conformity documents will be valid in all Customs union countries - Russia, Belarus, Kazakhstan, Armenia, and Kyrgyzstan.