Oman

We can provide you with Oman Type Approvals and Certifications.


WWBridge provides certification services in accordance with regulations, guidelines (and the latest updates) of the following authorities in Oman.

Certification services in Oman:

  • DGSM Oman
  • Omani/GCC standards
  • Telecom Type Approval

DGSM - Directorate General for Specifications and Measurements 

The Directorate General of Specifications and Measurements (DGSM) at the Ministry of Commerce and Industry (MOCI) is responsible for standardization, metrology, testing, quality control and quality assurance, conformity assessment and certification, and accreditation activities. All products imported into Oman are to be checked for quality and standards compliance before reaching the market.

Omani/GCC standards

Under Oman’s product certification scheme manufacturers should apply G-mark or the Omani quality certification mark on their products.
As part of the GCC Customs Union, Oman is working toward unifying its standards and conformity assessment systems with those of the GCC through the Gulf Standards Organization (GSO). Oman generally enforces GSO standards. Most Omani standards are either GSO standards or those derived from another international standards organization. If no GCC standards are applicable, common international standards will be accepted.

Gulf Conformity Mark, commonly known as G-Mark, is a specific marking of the Cooperation Council for the Arab States of the Gulf which is affixed on the product or/and its package to indicate product compliance to the requirements set out in the applicable Gulf Technical Regulations.

Omani quality certification mark is given by DGSM after inspection and testing to verify that the product complies with applicable Oman approved standards.

Telecom Type Approval

Telecom Type Approval is a requirement for Radio and Telecommunications Terminal Equipment (RTTE) to comply with specific technical specifications and the equipment must be registered with the TRA before it can be supplied to Oman. Registration of equipment with the TRA Telecommunications Regulatory Authority (TRA) must be supported by test reports to declare its conformity and by other technical documentation. An application form must be submitted to the TRA through online e-portal. Registered and approved equipment must be marked, or have a mark on its packaging (TRA Label), along with dealer information to identify that it has been Type Approved and that it may be used in Oman.

Required documents for Telecom Type Approvaltype approval

  1. Copy of Manufacturer Declaration of Conformity
  2. Test reports (RF, EMC and Safety) from a test lab recognized by the TRA

WWBridge provide services for manufacturers with expert support and guidance on the marking requirements and procedures. We are up-to-date with the latest guidance and standards and we can guide you through the entire process in a few steps.

How to get Oman approval documents for your business?

• Call WWBridge or leave your request on our site to have a free consultation
• We help you choose the right type of certification
• You send all necessary documents for the certificate
• We sign a Contract
• We analyze the documents and prepare drafts
• You receive the certificate
• We close the project

Looking for more information to get Oman approval documents? Feel free to contact us through e-mail: [email protected], or call +7 (495) 787-87-70.



Certification experts in Russia will be pleased to consult you in your own language




Products require certification

Available in:

EN

Certification by Continent and Country

Middle East UAE Oman Saudi Arabia Morocco Kuwait Egypt Colombia Moldova


F.A.Q.

Is the local representative company required for handling the EAC certification?
In accordance with the Customs Union legislation, a foreign manufacturer must have a Local representative company (an Applicant) on the territory of the Customs Union (CU) to issue the certificate/declaration. This means that an Applicant for you can be your customer, distributor or official representative company in CU. WorldWideBridge LLC will be mentioned on certificate/declaration as a local representative. 
What does Annual maintenance inspection assume?
Each serially producing product that requires Certificate of conformity is subjected to Annual Maintenance Inspection (or so-called Inspection control) in case of applying for more than 1-year certificate. It assumes that certification body which issued the CoC needs to confirm that the product is still produced at the same quality. It can be done through the re-testing or reviewing of Quality Management System documents. In some cases, the certification body can initiate a production site audits during AMI.
What does the cost of certification services depend on? Is there any price list?
The cost of certification services depends on the type of the required approval document and technical characteristics of the product itself that influences the scope of tests that are to be conducted. We have no price-list because used to work with a wide range of certification bodies, testing laboratories, and other specialized state institutions (Federal Security Service (FSS) licensing center, Radiofrequency center (RFC), Rostekhnadzor, Roszdravnadzor, etc.)And this means that the price can vary depending on product specification and certain certification body's pricing policy. If we are talking about the product specification, then the cost can be affected by the number of models, differences in applied models, the number of communication standards used (for radio products), the number of declared protective properties (for PPE), metrology characteristics ( for measuring devices) and so on. Each product is unique, each request must be carefully calculated to determine the type of document, the amount of testing, the most optimal certification scheme, the number of test reports, etc. Also, it is important to note that CU certification bodies have a certain accreditation (product range they can approve). So, in case of big projects that include different products for certification we should apply to several different authorities. Each of those has individual pricing policies due to their testing facilities. This fact can significantly affect the pricing and process. Our goal is to provide accurate consulting services in a specific case. Therefore, we are happy to evaluate the client's application, which contains the name and description of the product and the HS code (Customs code).
What is the EAC mark and when should it be applied?
EAC mark is an approval sign for products that are needed to be imported to the Customs Union (CU). This mark gives the opportunity to enter the markets of Russia, Belarus, Kazakstan, Armenia and Kyrgyzstan, distribute products throughout the entire territory of these countries, and extend your audience to almost 200 millions of people. EAC mark can be obtained only after the certification procedure according to the Technical Regulations of the Customs union is finished. ЕАС abbreviation stands for “Eurasian Conformity”. The unified mark is applied to each unit of production, packaging or accompanying documentation. The image of the unified mark has to be one colour and contrast with the surface colour on which it is applied. The place of application of the unified mark on the product, packaging and documentation is established in technical regulations of the Customs union.
Can the production site audit be replaced by CIG report?
The production site audit can be required in case the product requires the Certificate of conformity to the Technical Regulation of the Customs union. A lot of our clients are interested whether the production audit can be replaced by CIG report that use to be issued by most European producers. Customs union approval procedure does not assume replacing of the audit by providing CIG report because the expert from certification authority is obliged to check the QMS personally according to our law.
How is determine whether the Declaration of conformity or Certificate of conformity is required?
The necessary form of the approval document depends on the product description and HS code (Customs code). In each technical regulations of the Customs union, there is the List which determines whether Certificate of conformity or Declaration of conformity is required for certain product according to its HS Code and application field. In some cases, technical parameters must be also taken into consideration (for pressure equipment, PPE products, etc.).
What is required to import the samples for tests?
The samples can be imported for test only after all the preparations. Firstly, we should prepare the application for the certification and confirm it with the client.  On the second stage, the client s preparing the invoice for samples delivery that is needed to be sent to us for the check.  When the samples arrived at the customs clearance office the receiver prepare all the necessary documents confirming the import purpose and pay all the required fees to the government.  Import fees depend on the announced product price according to the shipping invoice. Products that are valued less than 200 EUR are free from such fees.  The final stage assumes the registration of the cargo declaration that confirms that the samples passed the customs clearance and can be used on for certification.
How can the EAC approval documents be prolonged after the expiration date?
Customs union certification system does not assume the prolongation procedure. This means that the certification process must be repeated including tests, production site audit if required. After all the procedures are done you will receive a new approval document. 
Is there an open register where the issued EAC approval document can be checked?
Almost all approval documents are to be registered in the open registers. Here you can refer to some of them: the Registered EAC Certificates of Conformity ,  the Registered EAC Declarations of Conformity , the registered State Registration Certificates , FFS Notifications (encrypted means) register.  If you need additional information please apply to [email protected]

Ask your questions

We are ready to provide you any assistance regarding certification services in Russia.
Please feel free to contact us.

%d0%b2%d0%b8%d0%ba%d0%b0%202

Viktoriia Artemenko

COO, Head of Certification Department


Live chat